Imodeli ye-C&K JCXY-40S XY Axis Manual Stage eneqhekeza elinye

Imodeli yeC&K JCXY-40S XY Axis Manual Stage enenxalenye enye Umfanekiso obonisiweyo

Inkcazo emfutshane:

Uhlobo:Ngesandlaindawo ethe tyeiqonga

Uhlobo lwesitimela sesikhokelo:isikhokelo see-cross-rollers

Icala lokudlulisela: X Y i-axis

Indlela yokondla:Intloko ye-micrometer

Izixhobo:I-alloy ye-aluminiyam

Unyango lomphezulu:I-anodized emnyama

Ubukhulu:32mm

Uluhlu lokuhamba: ±6.5mm

Umthamo womthwalo: 2.8kgf

Thumela i-imeyile kuthi Khuphela njengePDF
Khuphela njenge-2D Khuphela njenge-3D

Iinkcukacha zeMveliso

FAQ

Ividiyo yeMveliso

Iithegi zeMveliso

Uluhlu lweeParamitha zeMveliso

Imodeli	I-JCXY-40S
Ubungakanani beSueface	40*40mm
Uluhlu lokuHamba	± 6.5mm
Ukufana	60μm
Ukuzoba i-parallelism	20μm
Ubu-orthogonality	10μm
Isikhokelouhlobo	Isikhokelo se-crossed roller
Umthamo woMthwalo	2.8 kg
Ubunzima	0.22 kg
Izinto eziphathekayo	I-aluminiyam
Gqibezela Unyango	I-Anodizing emnyama

I-JCXY-40LS, i-JCXY-40RS, i-JCXY-40CS_01

Chaza

Esi silayidi esidibeneyo esicwangcisiweyo ngesandla inqanaba le-JCXY-40S ine-standard 40×Iqonga elingama-40 mm, elibonelela ngoyilo oluncinci nolugcina indawo olunoluhlu olusebenzayo lokuhamba olufikelela kwi-13 mm. Xa lithelekiswa nezilayidi zemveli ezidityanisiweyo, lifikelela kubude obuphantsi kakhulu xa lilonke ngokweenkcukacha zokuhamba ezifanayo, nto leyo eyenza ukuba lilungele ukusetyenziswa kwezicelo ezinesithuba esilinganiselweyo sokufakela kunye nokusebenza kakuhle kwendawo.

Yenzelwe ukufuduka ngokuchanekileyo kunye nokulungiswa kolungelelwaniso, esi silayidi siqinisekisa ukusebenza kakuhle kunye nokubekwa ngokuchanekileyo. Sisetyenziswa kakhulu kwizixhobo ezizenzekelayo ezifana nokuhambisa, ukuprinta isikrini, kunye neenkqubo zokuprinta iiphedi, sisebenza njengecandelo elifanelekileyo kwiinkqubo zokwenza ngokuchanekileyo.

Njengomvelisi ngqo, sisebenzisa iindlela eziphambili zemveliso ukuze sinikezele ngemigangatho yomgangatho wokuthumela ngaphandle efana neyeemveliso zaseJapan naseKorea. Ngolawulo olungqongqo lomgangatho, iimveliso zethu zibonelela ngokusebenza okuzinzileyo kunye nobomi benkonzo ende. Ngokwamkela imodeli yokuziphanda ngokwayo neyokuzenzela, siyabasusa abalamli, sibonelela ngeenzuzo ezinkulu zeendleko kunye nexabiso elibalaseleyo lemali. Nokuba kukulungiswa kokuhamba kakuhle okanye imisebenzi yokulungelelanisa inkqubo, esi silayidi sidibeneyo siyakwazi ukusiphatha ngokulula.

Ngaphambili: Izixhobo ze-C&K JCXY-30 XY Axis Manual Stage Optical zisesitokhweni

Okulandelayo: Imodeli edibeneyo yeC&K JCXY-60S XY Axis Manual Stage

1. Ingaba ungumenzi ngqo okanye yinkampani yorhwebo?
A: Singumvelisi. Zonke iimveliso zethu zenziwa kwiDongguan City, kwiPhondo laseGuangdong, eTshayina. Wamkelekile ukuba usityelele!

2. Yintoni inzuzo yakho?
A: Siyinkampani edibeneyo yaseTshayina naseMzantsi Korea. Sisebenzisana ngobuchwepheshe kwaye sabelana ngolwazi nenkampani ye-MENTOR T&C evela eMzantsi Korea ukusukela ngo-2018.

3.Ungakunika iwaranti yeemveliso zakho?
A: Zonke iimveliso zihlolwa umgangatho ngaphambi kokuba zithunyelwe. Sinikezela ngewaranti yonyaka omnye kwimveliso nganye. Ingxelo yokuthunyelwa iya kuqhotyoshelwa ekuthunyelweni kwemveliso.

4. Ithini inkonzo yakho emva kokuthengisa?
A: Ukususela ngo-2019, sithembisa abathengi bethu inkonzo "ye-24H esizeni yokusombulula iingxaki (eTshayina kuphela)" kunye nenkonzo "yesisombululo sempendulo se-48H" (kwilizwe langaphandle). Nceda uzive ukhululekile ukunxibelelana nathi.

5.Kuthekani ngexesha lokuhanjiswa?
A: Uninzi lweemveliso zisesitokhweni, iiodolo ezincinci kunye neesampuli zingathunyelwa ngaphakathi kweentsuku ezi-3-8 zokusebenza. Ukuba uneeodolo ezinkulu, nceda uqinisekise umhla wokuhanjiswa kunye nenkonzo yabathengi.

6. Yintoni i-MOQ? Ndingafumana iisampulu kuqala?
A: Ukuba "ulungele ukuthunyelwa", isampuli iyafumaneka. Ngoko ke i-MOQ yi-1 piece /1 set. Ukuze kwenziwe ngokwezifiso, kufuneka sixoxe ngeenkcukacha ezithe vetshe. Ikhowuteshini yokugqibela ihambelana nokufumana inkcazo epheleleyo yeemveliso ozifunayo, ubungakanani, izinto, ubungakanani njalo njalo.

7. Ndingayongeza ilogo yam?
A: Ewe. Nika nje ifayile ye-AI okanye umfanekiso welogo yenkampani yakho, emva koko singakwenzela ilogo ye-laser.